Mainly to be used to store and transport the opened using insulin and all medicines
required to storage at room temperature (≤25℃) condition.
Unique coolant will be endothermic at high temperature, it will be exothermic
at low temperature.
When fully cool storage, the internal temperature of this product
can be kept at 2-20℃ for 24 hours in the 40℃ climate.
the unique PCM coolant inside can freeze at 9℃,which means
it can become ‘ICE’ in the fridge with 0℃ plus temperature,
melt and absorb heat to keep the flask at 9℃
for the safety of insulin.
Like a mug,easy to carry
2 insulin pens or 8 insulin refill cartridges
How to use
1. Summer condition,3 ways to cool down the coolant inside(cool storage)
when the flask internal temperature lower than 9℃ ,it means the completion of cool storage.
When cool charging in the freezer or refrigerator, flask shall be open the lid and place the thermometer in the flask.
Freezer:Leave the flask open in the freezer for 10-12 hours,
make full cool charging.When making full cool charging, then can be used or placed in the fridge for use.
If longer time may result in overcooling (<2℃), can be filled with the room temperature water(usually 20℃)into the flask. After 5 minutes, when the internal temperature of flask up to 2℃or above, please drain of water and dry liner, then can be used;
If the temperature is still less than 2℃,then repeat above steps, and till to the temperature up to 2℃ or above.
Fridge:leave the flask open in the fridge all the time, make it ready to use.
It takes 48hours to make full cool charging depending on the fridge temperature.
It is recommended the knob to be adjusted to higher number(4 or 5) to have the fridge temperature as 2℃.
Ice:While traveling,150gram icecan be put into the flask and make a complete cool charging
2. Winter condition,2 ways to make the heat storage, the flask temperature higher than 11℃means the completion of heat charging.
Room temperature:leave flask open in the room with temperature higher than
11℃(but lower than 20℃) all the time and it will be ready to use when going out.
Hot water:put in 40℃ water to heat the flask higher than 11℃ but lower than 20℃.
Never put in hot water(50℃ above) as it may damage the plastic interior wall.
Picture for reference
The main purpose of our product is to solve the Diabetes Out-travelling's problem,not only have a good trip,but also have a healthy body.Welcome to join us,your health,we care!